Chimney Installation in New Jersey | Done Rite
New chimney installation and chimney rebuild solutions designed for safe performance, clean water-management details, and long-term durability.
Written estimates • Photo documentation • Clean jobsite • Clear next steps
Need a New Chimney? Here’s When Installation Makes Sense
A new chimney installation (or rebuild) may be the right move when the existing chimney is beyond repair, unsafe, or repeatedly leaking.
Common reasons to consider chimney installation:
Severe cracking, spalling, or leaning chimney structure- Chronic chimney leaks despite repeated patching
- Major crown deterioration or structural failure
- Damaged or outdated chimney components that impact performance
- Rebuilding after storm or long-term moisture damage
- Replacing an old chimney to match a new roof or renovation plan
Not sure if you need a rebuild, repair, or new installation? We’ll inspect and recommend the most practical option.
A properly installed chimney is essential for safely venting smoke, heat, and harmful gases from your fireplace, stove, or heating system. Whether you’re adding a new fireplace, upgrading an outdated system, or building a new home, professional chimney installation is critical to ensuring long-term performance, safety, and code compliance.
Chimney systems must withstand constant exposure to heat, moisture, wind, and temperature changes. Improper installation can lead to poor draft, leaks, structural damage, or dangerous carbon monoxide buildup inside your home. That’s why it’s important to work with experienced professionals who understand the complexities of chimney design and installation.
The chimney installation experts at Done Rite specialize in designing and installing chimney systems that are both durable and efficient. We carefully evaluate your home’s layout, roofing structure, and heating system requirements to ensure your chimney is properly sized, positioned, and vented for optimal performance. From masonry chimneys to factory-built and metal flue systems, we install solutions that meet safety standards and local building codes.
A professionally installed chimney enhances the efficiency of your fireplace or heating appliance while reducing fire risks and moisture intrusion. Proper flashing, sealing, and venting are key components of every installation, and we pay close attention to every detail to ensure a watertight, secure finish that integrates seamlessly with your roof.
Whether you’re installing a brand-new chimney or replacing an old, damaged one, our team handles the entire process from start to finish. We use high-quality materials and proven installation methods to deliver a chimney that performs reliably and stands up to the elements for years to come.
Some situations where chimney installation may be needed include:
- New home construction
- Adding a fireplace, wood stove, or heating appliance
- Replacing an outdated or unsafe chimney system
- Upgrading for improved efficiency or code compliance
- Severe damage that makes repair impractical
If you’re planning a new chimney installation or need expert guidance on the right system for your home, Done Rite is here to help. Our experienced team will walk you through the options and provide a safe, durable installation you can trust. Contact us today to schedule a consultation and ensure your chimney is installed the right way from the start.
What Chimney Installation Includes
A chimney isn’t just brick or block—it’s a system that must handle heat, draft, and water.
Chimney installation may include:
- Planning the scope (new build vs rebuild vs partial rebuild)
- Removal of damaged chimney sections (when required)
- Construction of a new chimney structure to match the home
- Proper flashing integration with the roofing system (critical for leak prevention)
- Chimney crown build/rebuild (water shedding and protection)
- Chimney cap installation (helps keep out debris and animals)
- Cleanup and final walkthrough
Our Chimney Installation Process
You’ll know what’s happening before, during, and after the job.
We document the existing condition, roof tie-in points, and leak/structural areas.
You get a straightforward quote and a plan that fits your home.
Access planning, protection of surrounding areas, and jobsite setup.
Safe removal of damaged sections or full teardown for rebuilds.
Chimney built with attention to alignment, stability, and water-management detailing.
Proper roof-to-chimney integration to reduce leak risk.
Final review and documentation.
Maintenance recommendations and what to watch over time.
Chimney Flashing: The Leak-Prevention Detail That Matters Most
Many “chimney problems” are actually roof-to-chimney connection problems. That’s why proper flashing and sealing details are essential during installation.
We focus on:
- Correct flashing integration at the roof line
- Clean transitions that shed water properly
- Durable detailing that reduces recurring leak issues
- Preventative replacement of vulnerable components (boots, vents, edge details)
- Gutter tie-in planning (if your drainage needs attention)
Recent Chimney Installation Work
Roof Repair (Leak Fix + Flashing)
Leak traced to compromised flashing and missing shingles. Replaced damaged components, sealed transitions, and verified the repair with a controlled water test.
Materials Used (Roof Repair):
- Architectural asphalt shingles (matching color/line)
- Ice & water shield (peel-and-stick membrane) for vulnerable areas
- Synthetic underlayment patch (where needed)
- Step flashing / counter flashing (aluminum or galvanized steel)
- Pipe boot / vent flashing (as applicable)
- Roofing sealant (exterior-grade)
- Roofing nails (galvanized)
- Starter strip shingles (if repair requires edge rebuild)
- Starter strip shingles (if repair requires edge rebuild)
Roof Replacement (Full System)
Full roof replacement due to age and granule loss. Removed old materials, repaired decking where needed, upgraded protection at eaves/valleys, and installed a new ventilation-ready system.
Materials Used (Roof Replacement):
- Architectural shingles (or designer shingles, if applicable)
- Starter strip + ridge cap shingles
- Ice & water shield (eaves/valleys/penetrations)
- Synthetic underlayment (full coverage)
- Pipe boot / vent flashing (as applicable)
- Drip edge (aluminum) for eaves and rakes
- Valley protection (ice & water + woven/closed-cut valley as specified)
- Flashing package (chimney, walls, vents)
- Ridge vent system (with matching intake ventilation if required)
- Pipe boots / vent flashings
- Fasteners: galvanized roofing nails
- Plywood/OSB sheathing (only where replacement is needed)
Our Services
Discount Coupon
Get a Free Roof Replacement Estimate
What Affects Chimney Installation Cost in New Jersey?
Chimney installation pricing depends on structure, access, and how much rebuilding is needed.
Key cost factors include:
Partial rebuild vs full chimney rebuild
Height/size of the chimney and roof pitch/access- Flashing complexity at the roof line
- Crown/cap requirements
- Extent of removal and disposal
- Any related roofing work needed at the tie-in
Why Homeowners Choose Done Rite
Chimney installation pricing depends on structure, access, and how much rebuilding is needed.
Clear, written estimates (no vague surprises)
Photo documentation and transparent communication
Strong focus on leak prevention details (especially flashing)
Clean jobsite and respectful crews
Scheduled work with timeline expectations
Practical recommendations—not pressure
How Long Does Chimney Installation Take?
Timelines vary depending on whether it’s a partial rebuild or full installation.
Factors that affect schedule:
Full rebuild vs partial rebuild scope
Chimney height and roof access
Weather windows and safety conditions
Roof tie-in work (flashing complexity)
Materials and curing time where applicable
We’ll give you a realistic timeline before work begins.
Chimney Installation We Serve in New Jersey Area
- Bergen County
- Passaic County
- Hudson County
- Essex County
- Morris County
- Hunterdon County
- Somerset County
- Sussex County
- Union County
- Warren county
Chimney Installation FAQs
Do I need a permit for chimney installation in New Jersey?
Permit requirements can vary by municipality and by scope. If a permit is required, we’ll help confirm what your town needs and guide the process.
Can you rebuild just the top portion of a chimney?
In some cases, yes—partial rebuilds can be an option when the lower structure is stable. We’ll inspect and recommend the best approach.
Will chimney installation stop leaks around the chimney?
If leaks are caused by failing structure or poor roof-to-chimney detailing, proper rebuild and flashing integration can make a major difference.
Do you install chimney caps and crowns?
Caps and crowns are common components of leak prevention and protection. We’ll recommend what’s appropriate for your chimney setup.
How do I know if my chimney is unsafe?
Visible cracking, leaning, loose masonry, or recurring moisture damage are common warning signs. An inspection is the best way to confirm the condition.