Chimney repair, replacement, installation, and cleaning—handled with clear estimates, photo documentation, and durable leak-prevention details.
Get a Free Estimate
(973) 510-1541
Done Rite Roof Repair > Blog
Written estimates • Photo documentation • Clean jobsite • Warranty options
Chimney Services We Provide
If your chimney is leaking, deteriorating, or due for service, we’ll help you choose the right solution—without guesswork.
Our Services:
-
Chimney Repair -
Chimney Replacement -
Chimney Installation -
Chimney Cleaning
Not sure what you need? We’ll inspect and tell you honestly what is necessary.
Your chimney plays a critical role in safely venting smoke and gases from your fireplace or heating system. However, because it’s constantly exposed to the elements, it can become damaged over time. Wind, rain, snow, ice, extreme temperatures, and even the occasional bird or animal can impact the integrity of your chimney. If you’re noticing cracks, leaks, or other issues, it’s important to address them promptly to avoid further damage and potential safety risks.
The chimney repair experts at Done Rite specialize in inspecting chimneys for any signs of wear or damage and offering efficient repairs to ensure everything is functioning properly. A small crack or leak might seem minor at first, but left unchecked, it can lead to major issues like water damage, dangerous fumes in your home, or even structural damage to your chimney and roof.
Whether your chimney has suffered from a recent storm, age, or just normal wear and tear, we’ve got you covered. From chimney cap replacement and flashing repair to full masonry restoration, we provide comprehensive services to keep your chimney in top shape. We use high-quality materials and advanced techniques to ensure that your chimney is both safe and efficient.
If you’re looking to prolong the life of your existing chimney, we can help with maintenance tasks like repointing brickwork, sealing joints, or patching up cracks. These preventative measures can help keep moisture out and protect the integrity of your chimney, reducing the need for costly repairs down the road.
Your chimney is an essential part of your home’s safety and comfort, and keeping it well-maintained can prevent costly damage. It’s also key in protecting your home from the dangers of carbon monoxide buildup, fire hazards, and water damage.
Some common signs that your chimney may need repair include:
- Cracked or missing bricks
- Leaks around the chimney or roofline
- A damaged or missing chimney cap
- A smoky or lingering smell inside your home
- Crumbling mortar or brickwork
- Water stains or rust around the fireplace area
- A leaning or tilting chimney structure
If you notice any of these issues, don’t wait to call a professional. Our team is here to evaluate your chimney and provide the repairs or maintenance needed to ensure it’s safe, functional, and performing at its best. Reach out today to schedule an inspection and let us help keep your chimney in excellent condition!
Chimney Leaks: The Most Common Root Cause
Many chimney “leaks” are caused by weak points like the flashing, crown, or cap—not just the brick itself. We focus on diagnosing the true entry point and fixing the details that prevent repeat problems.
Common leak sources include:
-
Roof-to-chimney flashing transitions -
Cracked/deteriorated chimney crown -
Missing or damaged chimney cap -
Worn mortar joints absorbing moisture -
Open gaps around roof details near the chimney
Our Chimney Service Process
You’ll know what’s happening before, during, and after the job.
Step – 1
Inspection & photos
We document the issue and identify the root cause.
Step – 2
Clear options & written estimate
Repair vs rebuild vs replacement, with a defined scope.
Step – 3
Permits (when required)
Requirements vary by municipality and scope; if needed, we’ll help confirm what applies.
Step – 4
Work execution
Durable repairs and clean detailing, focused on leak prevention.
Step – 5
Cleanup & walkthrough
We review the work and explain what to watch going forward.
Repair vs Replacement: How to Know What You Need
We’ll explain both options clearly so you can choose with confidence.
-
Chimney repair is usually best when damage is localized and the structure is stable. -
Chimney replacement/rebuild may be smarter when there’s widespread deterioration, instability, or recurring leaks after multiple repairs.
Roof Repair (Leak Fix + Flashing)
Leak traced to compromised flashing and missing shingles. Replaced damaged components, sealed transitions, and verified the repair with a controlled water test.
Materials Used (Roof Repair):
- Architectural asphalt shingles (matching color/line)
- Ice & water shield (peel-and-stick membrane) for vulnerable areas
- Synthetic underlayment patch (where needed)
- Step flashing / counter flashing (aluminum or galvanized steel)
- Pipe boot / vent flashing (as applicable)
- Roofing sealant (exterior-grade)
- Roofing nails (galvanized)
- Starter strip shingles (if repair requires edge rebuild)
- Starter strip shingles (if repair requires edge rebuild)
Roof Replacement (Full System)
Full roof replacement due to age and granule loss. Removed old materials, repaired decking where needed, upgraded protection at eaves/valleys, and installed a new ventilation-ready system.
Materials Used (Roof Replacement):
- Architectural shingles (or designer shingles, if applicable)
- Starter strip + ridge cap shingles
- Ice & water shield (eaves/valleys/penetrations)
- Synthetic underlayment (full coverage)
- Pipe boot / vent flashing (as applicable)
- Drip edge (aluminum) for eaves and rakes
- Valley protection (ice & water + woven/closed-cut valley as specified)
- Flashing package (chimney, walls, vents)
- Ridge vent system (with matching intake ventilation if required)
- Pipe boots / vent flashings
- Fasteners: galvanized roofing nails
- Plywood/OSB sheathing (only where replacement is needed)
Roof Repair (Leak Fix + Flashing)
Leak traced to compromised flashing and missing shingles. Replaced damaged components, sealed transitions, and verified the repair with a controlled water test.
Materials Used (Roof Repair):
- Architectural asphalt shingles (matching color/line)
- Ice & water shield (peel-and-stick membrane) for vulnerable areas
- Synthetic underlayment patch (where needed)
- Step flashing / counter flashing (aluminum or galvanized steel)
- Pipe boot / vent flashing (as applicable)
- Roofing sealant (exterior-grade)
- Roofing nails (galvanized)
- Starter strip shingles (if repair requires edge rebuild)
- Starter strip shingles (if repair requires edge rebuild)
Roof Replacement (Full System)
Full roof replacement due to age and granule loss. Removed old materials, repaired decking where needed, upgraded protection at eaves/valleys, and installed a new ventilation-ready system.
Materials Used (Roof Replacement):
- Architectural shingles (or designer shingles, if applicable)
- Starter strip + ridge cap shingles
- Ice & water shield (eaves/valleys/penetrations)
- Synthetic underlayment (full coverage)
- Pipe boot / vent flashing (as applicable)
- Drip edge (aluminum) for eaves and rakes
- Valley protection (ice & water + woven/closed-cut valley as specified)
- Flashing package (chimney, walls, vents)
- Ridge vent system (with matching intake ventilation if required)
- Pipe boots / vent flashings
- Fasteners: galvanized roofing nails
- Plywood/OSB sheathing (only where replacement is needed)
Our Services
Discount Coupon
Get a Free Roof Replacement Estimate
Why Homeowners Choose Done Rite
If your chimney is leaking, deteriorating, or due for service, we’ll help you choose the right solution—without guesswork.
Clear, written estimates (no vague surprises)
Photo documentation and transparent communication
Attention to the “details that prevent leaks” (flashing, ventilation, transitions)
Clean jobsite and respectful crews
Scheduled work with timeline expectations
Warranty options explained in plain language
Chimney Services FAQs
Do I need a permit for chimney work in New Jersey?
Permit requirements can vary by municipality and project scope. If a permit is required, we’ll help confirm what applies and guide next steps.
What’s the most common cause of chimney leaks?
Many leaks come from flashing transitions, crown deterioration, cap issues, or mortar joints that have absorbed moisture over time.
Can you tell me if I need repair or replacement?
Yes. We’ll inspect, document what we see, and explain the most practical option with a clear scope and estimate.
Do you work on chimney flashing?
Flashing at the roof line is a common leak point. We focus on proper roof-to-chimney detailing to reduce repeat leaks.
Permit requirements can vary by municipality and project scope. If a permit is required, we’ll help confirm what applies and guide next steps.
Many leaks come from flashing transitions, crown deterioration, cap issues, or mortar joints that have absorbed moisture over time.
Yes. We’ll inspect, document what we see, and explain the most practical option with a clear scope and estimate.
Flashing at the roof line is a common leak point. We focus on proper roof-to-chimney detailing to reduce repeat leaks.
