Replace old, leaking, or failing gutters with a properly sized system designed for reliable drainage and long-term protection of your roofline, siding, and foundation.
Get a Free Estimate
(973) 510-1541
Done Rite Exteriors
Written estimates • Photo documentation • Clean jobsite • Warranty options
When It’s Time for Gutter Replacement
If your gutters are failing in multiple areas, replacement can be a better long-term solution than repeated patch repairs.
Common signs you may need new gutters:
-
Persistent leaks at seams, corners, or end caps -
Gutters pulling away from the fascia or repeatedly sagging -
Rusting, holes, cracks, or deteriorated sections -
Frequent overflow even after cleaning and minor repairs -
Standing water caused by poor pitch or warped sections -
Fascia/soffit damage or staining at the roof edge -
Downspouts draining too close to the home (causing pooling)
Not sure if repair is enough? We’ll inspect and give you a clear recommendation.
Our gutter experts can inspect your home and discuss replacement solutions with you. If you think it may be time for new gutters or you’re looking to upgrade the look and function of your current system, we can provide you with a free quote.
It’s often hard to tell when you need a gutter replacement because you may not notice many of the problem spots because they appear while you’re inside avoiding the bad weather. If sections of your gutter have fallen off of your house that is often a sign that the fascia board may be damaged and the fasteners no longer have a firm grip on your home.
You may also see that you have areas where water is spilling over the edges of the gutter. This can be caused by a clog, bad slope, or issues with the fasteners. If you notice water come down your walls during heavy rain this could be caused by water getting under your roof at the gutter. You may also experience large areas of pooling water close to your home’s foundation. There are many signs that our trained professionals know to look for and we can help you determine if it is time for a gutter replacement. We offer a variety of gutter styles, colors, and materials including:
- Standard Aluminum Gutter
- Seamless Gutter
- Half Round Gutter
- Copper Gutter
Age, poor installation, lack of maintenance, low-quality materials, or particularly intense weather can all leave you in dire need of new gutters. Countless problems can afflict metal gutters, plastic gutters, or both. Common ones we see include:
- If water is running over the edges of your gutters, it might mean they don’t have the capacity to drain your roof properly in the weather you’re facing—or it might mean you have clogs, obstructions, or other problems slowing down the flow of water.
- If your gutters seem to be sagging in certain places or pulling away from your home, this can suggest water is sitting in one place for long periods of time—a sure sign of clogs, poor design, etc.
- Broken fasteners. Damaged or broken fasteners which should be keeping your gutters attached to your home can quickly lead to a complete failure of your gutter system. If you spot this, fix it quickly!
- Water pooling. When gutters fail to guide water away from your home and prevent pooling on your roof or along your foundation, it’s time for a new install or a new design.
- There are countless reasons your gutters might start to leak, but all of them warrant new gutters. Gutters in good working condition shouldn’t leak at all—small leaks never stay small.
- Rusted connectors. In metal gutters, it’s common for issues to stem from rusted or corroded nuts and bolts. This can be the source of a problem or make fixing other problems more difficult.
- Failed gaskets. In plastic gutters, gaskets work to keep the gutter watertight, but these can fall apart over time or fail as debris builds up.
Don’t trust an amateur to take care of your roof or its gutters. Go with an expert you can trust; choose Done Rite for all your gutter installation and repair needs!
What’s Included in Done Rite Gutter Replacement
A new gutter system should do one thing well: move water away from your home reliably.
Gutter replacement typically includes:
-
Removal and disposal of old gutters (as needed) -
New gutter installation with secure attachment and proper pitch -
New or updated downspout layout (as applicable) -
Leak-resistant connections and corner details -
Cleanup and final walkthrough -
Recommendations for maintenance and seasonal care
Our Gutter Replacement Process
You’ll know what’s happening before, during, and after the job.
Step – 1
Inspection & measurement
We assess existing issues and the roofline layout.
Step – 2
Clear options & written estimate
You get a straightforward quote and a plan that fits your home.
Step – 3
Scheduling & prep
We confirm timeline, access, and protection for landscaping/driveway.
Step – 4
Removal
Old system removed (as needed) and prepared for replacement.
Step – 5
Installation
New gutters installed with proper pitch and secure fastening.
Step – 6
Flow check
We verify that the system drains correctly through downspouts.
Step – 7
Cleanup & walkthrough
We leave the area clean and review the work with you.
What Makes a Gutter System Work (And Why Install Quality Matters)
Even new gutters can fail if they’re not installed correctly.
We focus on:
-
Correct pitch/slope so water flows to downspouts -
Secure attachment to prevent sagging over time -
Clean corners and joints to reduce leak risk -
Downspout flow planning to move water away from the home -
Drainage awareness to reduce pooling near the foundation
Roof Repair (Leak Fix + Flashing)
Leak traced to compromised flashing and missing shingles. Replaced damaged components, sealed transitions, and verified the repair with a controlled water test.
Materials Used (Roof Repair):
- Architectural asphalt shingles (matching color/line)
- Ice & water shield (peel-and-stick membrane) for vulnerable areas
- Synthetic underlayment patch (where needed)
- Step flashing / counter flashing (aluminum or galvanized steel)
- Pipe boot / vent flashing (as applicable)
- Roofing sealant (exterior-grade)
- Roofing nails (galvanized)
- Starter strip shingles (if repair requires edge rebuild)
- Starter strip shingles (if repair requires edge rebuild)
Roof Replacement (Full System)
Full roof replacement due to age and granule loss. Removed old materials, repaired decking where needed, upgraded protection at eaves/valleys, and installed a new ventilation-ready system.
Materials Used (Roof Replacement):
- Architectural shingles (or designer shingles, if applicable)
- Starter strip + ridge cap shingles
- Ice & water shield (eaves/valleys/penetrations)
- Synthetic underlayment (full coverage)
- Pipe boot / vent flashing (as applicable)
- Drip edge (aluminum) for eaves and rakes
- Valley protection (ice & water + woven/closed-cut valley as specified)
- Flashing package (chimney, walls, vents)
- Ridge vent system (with matching intake ventilation if required)
- Pipe boots / vent flashings
- Fasteners: galvanized roofing nails
- Plywood/OSB sheathing (only where replacement is needed)
Roof Repair (Leak Fix + Flashing)
Leak traced to compromised flashing and missing shingles. Replaced damaged components, sealed transitions, and verified the repair with a controlled water test.
Materials Used (Roof Repair):
- Architectural asphalt shingles (matching color/line)
- Ice & water shield (peel-and-stick membrane) for vulnerable areas
- Synthetic underlayment patch (where needed)
- Step flashing / counter flashing (aluminum or galvanized steel)
- Pipe boot / vent flashing (as applicable)
- Roofing sealant (exterior-grade)
- Roofing nails (galvanized)
- Starter strip shingles (if repair requires edge rebuild)
- Starter strip shingles (if repair requires edge rebuild)
Roof Replacement (Full System)
Full roof replacement due to age and granule loss. Removed old materials, repaired decking where needed, upgraded protection at eaves/valleys, and installed a new ventilation-ready system.
Materials Used (Roof Replacement):
- Architectural shingles (or designer shingles, if applicable)
- Starter strip + ridge cap shingles
- Ice & water shield (eaves/valleys/penetrations)
- Synthetic underlayment (full coverage)
- Pipe boot / vent flashing (as applicable)
- Drip edge (aluminum) for eaves and rakes
- Valley protection (ice & water + woven/closed-cut valley as specified)
- Flashing package (chimney, walls, vents)
- Ridge vent system (with matching intake ventilation if required)
- Pipe boots / vent flashings
- Fasteners: galvanized roofing nails
- Plywood/OSB sheathing (only where replacement is needed)
Our Services
Discount Coupon
Get a Free Roof Replacement Estimate
What Affects Gutter Replacement Cost in New Jersey?
Pricing depends on scope, access, and roofline complexity.
Key cost factors include:
-
Home height and total gutter length -
Number of corners, roofline complexity, and downspouts -
Condition of fascia/attachment points
-
Downspout layout needs (drainage improvements) -
Add-ons (gutter guards)
Why Homeowners Choose Done Rite
Roof replacement pricing depends on the roof system and the home not just square footage.
Clear, written estimates (no vague surprises)
Photo documentation and transparent communication
Focus on drainage that protects the home
Clean jobsite and respectful crews
Scheduled work with timeline expectations
Practical recommendations without pressure
How Long Does Gutter Replacement Take?
Most gutter replacements follow a predictable schedule once access and scope are confirmed.
Timeline factors include:
Home height and roofline complexity
Total gutter length and number of downspouts
Access constraints and safety requirements
Any fascia issues discovered during removal
We’ll give you a realistic timeline before work begins.
Gutter Replacement FAQs
Do I need to replace my gutters if they leak?
Not always. Small leaks can sometimes be repaired. But if leaks are frequent, widespread, or the gutter system is deteriorated, replacement may be the better long-term solution.
Why do gutters overflow even after cleaning?
Overflow can be caused by incorrect pitch, undersized gutters, too few downspouts, or fast roof runoff. We’ll inspect and recommend the best fix.
Can you replace downspouts too?
Yes—downspouts are part of the drainage system, and replacing or adjusting them can improve performance.
How do I know if I need gutter guards?
Gutter guards can help in some situations but aren’t perfect for every home. We’ll explain options based on your roofline and tree coverage.
How long do new gutters last?
Lifespan depends on material, installation quality, maintenance, and local conditions. We’ll share what to expect during your estimate.
Not always. Small leaks can sometimes be repaired. But if leaks are frequent, widespread, or the gutter system is deteriorated, replacement may be the better long-term solution.
Overflow can be caused by incorrect pitch, undersized gutters, too few downspouts, or fast roof runoff. We’ll inspect and recommend the best fix.
Yes—downspouts are part of the drainage system, and replacing or adjusting them can improve performance.
Gutter guards can help in some situations but aren’t perfect for every home. We’ll explain options based on your roofline and tree coverage.
Lifespan depends on material, installation quality, maintenance, and local conditions. We’ll share what to expect during your estimate.
